Igwe mmiri mmiri EPA & CARB enwetara ahịrị mmanụ ọkụ dị ala
| Ngwaahịa: | Igwe mmiri mmiri EPA & CARB enwetara ahịrị mmanụ ọkụ dị ala |
| Ihe Nkeji: | JBD-A009 |
| Nha & Ụdị: | ID≥Φ2.5 mm; Haziri dị ka achọrọ. |
| Ihe: | FKM; FKM/ECO; FKM/ECO/AR/ECO |
| Nhazi: | 1 ruo 4 - oyi akwa |
| Agba: | Nwa |
| Ngwa | Jiri maka igwe mmiri mmiri, igwe mpụga na igwe inboard |
| Asambodo EPA & CARB | EE. |
| Ọkọlọtọ | SAE, SAE J1527, USCG, ISO7840, ASTM na ndị ọzọ |
| Ọdụ ụgbọ mmiri | Xiamen |
| OEM/ODM | anabatara |
| ngwugwu | Akpa PE+Katọn+Pallet |
| Usoro ịkwụ ụgwọ | T/T, L/C, Western Union |
| Ụlọ ọrụ mmepụta ihe | ISO/IATF16949 debara aha |
| Otu nka nka | Ahụmịhe afọ 30+ |
| Ihe nlele oge ndu | 7-15 ụbọchị |
| Oge mmepụta ihe | 20-30 ụbọchị |
Nkọwapụta
           Uzo esi anwale rubber & nkọwapụta | |||||
| ADHESION | ekewapụ obosara 25.4mm | N | 27 MIN | ||
| Mgbanwe Oyi | 1. HOSE ID≤19.05 MM -20℃± 2℃ × 5h, Flexed 180 degrees × 10 ugboro × 0.6MPA nrụgide | Ọ BỤGHỊ mgbawa, ọ dịghị mgbawa, ọ dịghị agbajikwa | |||
| 2. HOSE ID﹥19.05 mm -20℃±2℃×5h N'EKWESỊRỊGHỊ LOOP. agba abụọ 50.8mm ~ 63.5mm | Ọ BỤGHỊ mgbawa, ọ dịghị mgbawa, ọ dịghị agbajikwa | ||||
| VACUUM KWESỊRỊ | 65.7kpa × (15s ~ 60s) | <20% | |||
| Nnwale ịgbawa | NJ HOSE <25.4 MM | 1.2MPA(175PSI) MIN | |||
| HOSE ID>25.4 MM | 0.62MPA(90PSI) MIN | ||||
| Mgbochi mmanụ ụgbọala na mkpọsa mmanụ ụgbọala | 23℃±2℃×48h | Mgbanwe TENSILE | ％ | -40 Max | |
| ỌTỤTỤ Mgbanwe | ％ | -40 Max | |||
| Mgbanwe olu | ％ | 0～+50 | |||
| PERMEATION | 15g/m2/24h Max | ||||
| ỌRỤ NA-ARỤ | A ga-eji ọkụ ọkụ na-ekpo ọkụ malite ire ọkụ nke nutIL dị ihe dịka 12.7 mm nke okporo ụzọ ahụ na-ere ọkụ nke ukwuu. | Ire ọkụ ahụ ga-emenyụ onwe ya n'ime afọ 60 | |||
| Mgbochi ọkụ | DỊ KA SAE J1527 5.1-5.4 | Ọ BỤGHỊ NKWUKWU | |||
OEM & ODM
Marine Engines EPA & CARB Certified Low Permeation Fuel Line nwere ike ịbụ OEM & OEM dị ka eserese nke onye ahịa, ihe nlele na ihe ndị ọzọ chọrọ, na-emezu ihe achọrọ dị ala dị ka ọkọlọtọ SAE J1527, USCG, ISO 7840, ASTM, SAE, YDK, HES, EX-S na ndị ọzọ.
Asambodo EPA & CARB
Igwe mmiri mmiri EPA & CARB enwetara akwụkwọ ikike mmanụ dị ala nwetara Asambodo EPA & CARB.
Ngwa
Igwe mmiri mmiri EPA & CARB enwetara akara ahịrị mmanụ ala dị ala maka igwe mmiri, igwe n'èzí na injin inboard.
Uru Anyị Pụrụ Iche:
A: 30+ Afọ otu ọkachamara ahụmahụ nwere R&D Center siri ike.
B: Ike dị ike na 4 Factories Production base.
C: Ogo kwụsiri ike na ọnụ ahịa asọmpi ---- Anyị bụ ụlọ ọrụ jikọtara ọnụ na-ejikọta Rubber Raw Materials Refining & Mixer Process na imepụta ngwaahịa rọba na teknụzụ ọkachamara, yana Rubber Raw Materials Wholesales.
D: Oge nnyefe ---- 20-30 ụbọchị maka mmepụta oke.
Ee, OEM/ODM nwere ike ịnakwere.
Ọtụtụ n'ime ngwaahịa anyị bụ ahaziri na arụpụtara dịka eserese na ihe ndị ahịa chọrọ.
Ee, PPAP bụ akwụkwọ bụ isi n'okpuru asambodo IATF16949 anyị.
T/T na L/C na-anabata .30% downpayment na itule tupu mbupu site T / T.Ma ọ bụ 100% LC na-apụghị ịgbagha agbagha na anya.
Anyị isi roba & Plastic ihe bụ NBR, SBR, NR, ACM, AEM, CSM, ECO, FKM, VMQ, EPDM, SILICONE, PVC, TPU, ect.
Ọdịdị nke Hose
Usoro njikwa ogo
Usoro mmepe ngwaahịa
Ngwaahịa Anakọta
Nkwakọ ngwaahịa & Mbupu
| Uzo esi anwale rubber & nkọwapụta | |||||
| ADHESION | ekewapụ obosara 25.4mm | N | 27 MIN | ||
| Mgbanwe Oyi | 1. HOSE ID≤19.05 MM -20℃± 2℃ × 5h, Flexed 180 degrees × 10 ugboro × 0.6MPA nrụgide | Ọ BỤGHỊ mgbawa Enweghị mgbawa Enweghị nkwụsị | |||
| 2. HOSE ID﹥19.05 mm -20℃±2℃×5h N'EKWESỊRỊGHỊ LOOP. agba abụọ 50.8mm ~ 63.5mm | Ọ BỤGHỊ mgbawa Enweghị mgbawa Enweghị nkwụsị | ||||
| VACUUM KWESỊRỊ | 65.7kpa × (15s ~ 60s) | <20% | |||
| Nnwale ịgbawa | NJ HOSE <25.4 MM | 1.2MPA(175PSI) MIN | |||
| HOSE ID>25.4 MM | 0.62MPA(90PSI) MIN | ||||
| Mgbochi mmanụ ụgbọala na mkpọsa mmanụ ụgbọala | 23℃±2℃×48h | Mgbanwe TENSILE | ％ | -40 Max | |
| ỌTỤTỤ Mgbanwe | ％ | -40 Max | |||
| Mgbanwe olu | ％ | 0～+50 | |||
| PERMEATION | 15g/m2/24h Max | ||||
| ỌRỤ NA-ARỤ | A ga-eji ọkụ ọkụ na-ekpo ọkụ malite ire ọkụ nke nutIL dị ihe dịka 12.7 mm nke okporo ụzọ ahụ na-ere ọkụ nke ukwuu. | Ire ọkụ ahụ ga-emenyụ onwe ya n'ime afọ 60 | |||
| Mgbochi ọkụ | DỊ KA SAE J1527 5.1-5.4 | Ọ BỤGHỊ NKWUKWU | |||
